ny300exrider
11-02-2004, 11:07 AM
on my 400ex the idle screw just doesnt do anything. i want to adjust the speed of my idle but the only way for it to work is to tighten or loosen the barrel adjuster on the actual throttle making it give it gas to idle. this makes it very twitchy and the slightest touch of the barrel adjuster changes the idle. when i turn the idle screw(its deifnitly the silver screw with a flathead cut on choke side of quad right?) it just turns and notihng happens. should i loosen the barrel adjuster all the way so it isnt idling and then try turning the screw?
its just annoying having to fiddle with the barrel adjuster all of the time, and an example is when its idling correct you can lean on the throttle cable and it will start giving it more gas because the cable needs to be tight to give it gas.
its just annoying having to fiddle with the barrel adjuster all of the time, and an example is when its idling correct you can lean on the throttle cable and it will start giving it more gas because the cable needs to be tight to give it gas.