View Full Version : CRF cuts out on bottom end.
Narly R
12-12-2004, 01:48 PM
When my bike starts to bog, and then i pin it it wants to die, it wont pull out of a bog sorta thing. Any ideas? Is it my needle, or maybe my pilot jet? My needle is in the middle right now, if it is cuuting out, should I move it up or down, is it getting too much feul? Thanks:)
sam the brave
12-12-2004, 02:15 PM
ceck the main jet,and pilot jet
Narly R
12-12-2004, 03:14 PM
Well I moved the needle down, and it made it worse, so it is as high as possible now, it is on the bottom notch. It still cuts out. I might try messing with the air/fuel mixture screw. It runs fine on the top end though, so I dunno if it is the main jet. I might try a bigger pilot.
sparks400
12-12-2004, 05:37 PM
its possiably because of cloged jets, or there adjusted wrong, its diffenity a carb/jet issue in my opinion
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.