tmlawr
08-29-2005, 10:17 AM
1996 Yamaha 350 bigbear
stock air filter and Cobra pipe
new std carb kit, std jetting
Bike ran great for hour or so at higer speeds, but fouled plugs quickly at lower speeds.
pilot jet is 2 - 3/8 out, needle is set in middle (stock), run like crap with a leaner setting and barely runs on a richer setting.
shoud i give the pilot jet a 1/4 turn or so out to stop the lower speeds from fouling?
Could it be my CDI box acting up?
I have replaced the outter coil, with no change in proformance.
i am ready to sink it inour pond!!!
stock air filter and Cobra pipe
new std carb kit, std jetting
Bike ran great for hour or so at higer speeds, but fouled plugs quickly at lower speeds.
pilot jet is 2 - 3/8 out, needle is set in middle (stock), run like crap with a leaner setting and barely runs on a richer setting.
shoud i give the pilot jet a 1/4 turn or so out to stop the lower speeds from fouling?
Could it be my CDI box acting up?
I have replaced the outter coil, with no change in proformance.
i am ready to sink it inour pond!!!