inacoma91
07-28-2001, 05:19 PM
I am having a little problem with my jetting. I have a Pro Circut T-4 and the K&N jet kit. I also have a hole in my air box the size of my filter and there is 3-1"holes behind the big hole. I also have the stock filter. I did everything that the instructions said. 170 main, 3 notch on the needle, 3 turns out on the air screw. My problem is when i am on full throttle let off gear down or two then hit the throttle a little bit it just wants to die sometimes. If i keep up on the Rpms then it wont do it. I tried playing with the air screw turning it out a half a turn and even a full turn from 3. I have even turned it in the same amount. The weather has been real screwy here lately so i probably need to mess with it some more. One day it will be real humid the next it will be cooler than it was the day before. Anyways this is only right when you try to give it gas at the start. Then it seems to want to die...............any ideas.
Andrew
2000 400 EX
Moose handlebars
CEET seat cover
14T drive sprocket
Pro Circut T-4
K&N jet kit
Shaved Fenders
Andrew
2000 400 EX
Moose handlebars
CEET seat cover
14T drive sprocket
Pro Circut T-4
K&N jet kit
Shaved Fenders