View Full Version : swingarm bolt w? grease zerk
Glamis400ex
04-15-2006, 10:00 AM
Who sells the pivot bolt with the grease zerk on the end?
Glamis
Aceman
04-15-2006, 04:42 PM
Here ya go Glamis
http://exriders.com/vbb/showthread.php?threadid=140882
Sounds like the Quadshop has them.
EXevan91
04-15-2006, 06:32 PM
ah but a would website help
prepracing
04-15-2006, 08:33 PM
Originally posted by Aceman
Here ya go Glamis
http://exriders.com/vbb/showthread.php?threadid=140882
Sounds like the Quadshop has them.
there is no more Quadshop
Aceman
04-16-2006, 09:46 AM
Woooops, I didn't know that. Sorry Glamis.:(
I know Woodward Specialties sells a stainless bolt for 60 on Ebay though.
wanta450
04-17-2006, 11:08 AM
make one tap out the one side for the grease zerk and the other side for and allen screw
aviator4
04-17-2006, 11:37 AM
I don't understand how greasing the inside of the swinger bolt helps? Aren't there access holes somewhere so that the grease gets in between the steel sleeves and the bolt? Thats what normally ceases up.
I would think this would weaken the bolt though... anyone?
400ex28
04-17-2006, 11:40 AM
Originally posted by aviator4
I don't understand how greasing the inside of the swinger bolt helps? Aren't there access holes somewhere so that the grease gets in between the steel sleeves and the bolt? Thats what normally ceases up.
I would think this would weaken the bolt though... anyone?
I was thinking the same thing.
Aceman
04-17-2006, 11:59 AM
Aviator4
http://www.exriders.com/vbb/showthread.php?s=&threadid=209044&highlight=swingarm+bolt+drill
aviator4
04-17-2006, 12:13 PM
Thanks. Was a little disheatening to hear about the guy that snapped his.
I think I'll keep putting anit-seize on it when I pull it. Never had a problem getting it out with that fix, and the anti-seize seems to work better than just plain 'ol grease.
wanta450
04-20-2006, 07:37 PM
sorry forgot to say that you do have to drill holes through it so rease gets through but i would just pull in and use antiseize
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.