QuadMatt
12-29-2002, 02:01 AM
Prelude: "So, my question is, How many times can the screw be turned out before you must go to the next pilot jet size."
As I understand it, the pilot jet and pilot mixture screw effect air/fuel mixture up to 1/8 throttle. Also, I think the stock pilot jet is a 38. I have seen on hear that some dudes run a larger pilot jet. I have installed the Dynojet kit and followed their instructions. I did the main and needle, and turned the screw out 3.5 turns out per the included instructions.
Now, i wish to make 1/8 throttle more rich. So, i figure, since i turned the screw out 3.5 turns, then that's the max. So, i must have to go to a larger pilot jet.
I called Dynojet and asked if they had pilot jets. The guy says "no". They do not offer them. He asks why i want to change the pilot jet. He says i should be able to make the correct adjustment using the screw.
On this site there is an article.
http://www.exriders.com/jetting/jetting.shtml
Here it states that the max to turn the screw is 2.5 turns.
So, my question is, How many times can the screw be turned out before you must go to the next pilot jet size.
Thanks for any knowledgeable responses.
As I understand it, the pilot jet and pilot mixture screw effect air/fuel mixture up to 1/8 throttle. Also, I think the stock pilot jet is a 38. I have seen on hear that some dudes run a larger pilot jet. I have installed the Dynojet kit and followed their instructions. I did the main and needle, and turned the screw out 3.5 turns out per the included instructions.
Now, i wish to make 1/8 throttle more rich. So, i figure, since i turned the screw out 3.5 turns, then that's the max. So, i must have to go to a larger pilot jet.
I called Dynojet and asked if they had pilot jets. The guy says "no". They do not offer them. He asks why i want to change the pilot jet. He says i should be able to make the correct adjustment using the screw.
On this site there is an article.
http://www.exriders.com/jetting/jetting.shtml
Here it states that the max to turn the screw is 2.5 turns.
So, my question is, How many times can the screw be turned out before you must go to the next pilot jet size.
Thanks for any knowledgeable responses.