250Rjunky
02-10-2014, 01:14 PM
Hello Friends,
I am setting the wheels in motion for a built TRX 250R/450R shootout/article in Dirt Wheels mag. Working with Cain Smead (DW Editor) to find a show quality built TRX 450R to run against my TRX 250R that was featured in the September 2013 issue of Dirt Wheels "BDT Honda 363R". This will most likely be done at Dumont Dunes, CA, so you will need to be within driving distance to this location. This would be more of a duner/sand dunes capable machine test. Ideally this will be a machine that was built by one of the top builders that want's to feature their company and work in a Similar fashion as the write up in the September 2013 issue that highlighted BDT Motorsports and The Dirt Factory. This is great exposure for the right build/company. My machine has changed a bit since that article with a new frame and swingarm/shock combo, but is essentially the same. So, put the feelers out there and please message me if you feel you have a viable candidate for the test.
Please understand we are looking for a high caliber/show quality machine that is on par with the 250R (see below picture) it will run against. Not sure of the test location and date at this point, but it will be sand, possibly Dumount. We want to get this done before it gets too hot, so in the next 2-3 months. So you will need to get the bike to the location of the test on the agreed upon day and time. I have done a couple of these are the testing is not easy and requires a good rider that is in good shape! I was cooked after the test on my bike!
http://i60.tinypic.com/r250yh.jpg
I am setting the wheels in motion for a built TRX 250R/450R shootout/article in Dirt Wheels mag. Working with Cain Smead (DW Editor) to find a show quality built TRX 450R to run against my TRX 250R that was featured in the September 2013 issue of Dirt Wheels "BDT Honda 363R". This will most likely be done at Dumont Dunes, CA, so you will need to be within driving distance to this location. This would be more of a duner/sand dunes capable machine test. Ideally this will be a machine that was built by one of the top builders that want's to feature their company and work in a Similar fashion as the write up in the September 2013 issue that highlighted BDT Motorsports and The Dirt Factory. This is great exposure for the right build/company. My machine has changed a bit since that article with a new frame and swingarm/shock combo, but is essentially the same. So, put the feelers out there and please message me if you feel you have a viable candidate for the test.
Please understand we are looking for a high caliber/show quality machine that is on par with the 250R (see below picture) it will run against. Not sure of the test location and date at this point, but it will be sand, possibly Dumount. We want to get this done before it gets too hot, so in the next 2-3 months. So you will need to get the bike to the location of the test on the agreed upon day and time. I have done a couple of these are the testing is not easy and requires a good rider that is in good shape! I was cooked after the test on my bike!
http://i60.tinypic.com/r250yh.jpg