06 electric start. Carbs cleaned good. Rode it all Sunday for 8 hours. Started giving me issues starting in neutral then it wouldn't start. Only way to start is push starting. Is this either my valves or auto decompressioner?
06 electric start. Carbs cleaned good. Rode it all Sunday for 8 hours. Started giving me issues starting in neutral then it wouldn't start. Only way to start is push starting. Is this either my valves or auto decompressioner?
Definitely symptoms of a valve issue
2009 CRF450 Full TI yosh and Remapped
2001 CR250 Single track bike
Ok thanks. Ill be working on them today
Doea anone know the intake and exhaust valve specs
this guy took the time to give a nice detailed run through of how to adjust and set valves on these machines
http://www.garyhott.com/valves.html
Checked my intake and exhaust valve clearances.. everything was on point. Noticed when I checked compression I had 0 psi.. checked my decompression arm and started ajusting the set screw outwards. Comprrssion started to build. Brought it up to 65 psi and fired right up. Not too sure how my compression completely dropped when the bike was riding like a champ. Running great again now