Surrounding Spar Technology (SST) G2 Frame
The Renegade 500 uses the industry-exclusive Surrounding Spar Technology (SST) G2 frame from BRP. The welded-steel SST G2 frame, introduced in 2012, incorporates engineering processes and geometry for increased structural integrity, improved durability and precision handling. The SST G2 frame design offers added strength, provides a lower center of gravity, improves handling and requires far less components, materials and welds than a traditional tube frame.
Double A-arm front suspension with dive-control geometry
The Renegade 500 retains its race-proven double A-arm setup. The 2015 model uses motion control shocks with five-way adjustable preload settings. Front-end suspension travel is 9 inches (23.6 cm). Dive-control geometry tightly controls the roll-center, especially when entering corners. The setup also inspires confidence, reducing kickback to the operator, by locating the knuckle in the wheel.
Trailing Torsional Independent (TTI) rear suspension
Using 75 percent less moving parts than competitive systems, TTI was designed to eliminate scrub and camber changes when the suspension moves up and down and keep the quad in straight line. Unique to Can-Am, the proven Torsional Trailing arm Independent rear suspension offers increased rigidity and improved suspension travel at 9.3 inches (24.1 cm). This suspension setup also includes a removable external sway bar and lower pivot points for geometric squatting to improve traction and the transferring of power to the ground.
Front and rear motion control shocks
The Renegade 500 wears front and rear motion control shocks to smooth out the trail. The shocks offer five settings of adjustable preload. The suspension supplies 9 in (229 mm) of travel up front and 9.3 inches (236 mm) in the rear.
Visco-Lok front differential
The innovative Visco-Lok front differential is unique to the ATV industry. The progressive auto-locking system constantly monitors front wheel speed and, if it detects one wheel spinning more quickly than the other, it progressively sends additional power to the wheel with better traction. Wheel hop or driveline wind-up is virtually eliminated to keep the system transparent to the operator. The 100 percent locking differential means no need for a rev or speed limiter or special-functioning levers to pull.
12-inch (30.5 cm) cast-aluminum wheels
The Renegade 500 model has innovative computer-optimized, center-less wheels to reduce unsprung weight and offer improved strength. Durability increased in strategic areas while excess material was eliminated in other areas to save weight.
25-inch (66cm) ITP Holeshot ATR tires
The Holeshot ATR is a versatile, high-traction tire for proven all-around trail performance.
214mm hydraulic disc brakes
Two large 214mm disc brakes with twin-piston calipers for superior stopping power can be found up front on the Renegade 500. At the rear, the model uses two, twin-piston caliper and 214mm hydraulic disc brakes. The system also includes separate front and rear hand brake levers for optimal control. |